how to remove a hot tub from a deck


Removing a hot tub from a deck is a substantial task that involves disassembling the hot tub, disconnecting utilities, and potentially modifying or repairing the deck. Here are the general steps to remove a hot tub from a deck:

Materials and Tools You’ll Need:

  • Safety goggles and gloves (recommended)
  • Screwdrivers and wrenches
  • Utility knife or wire cutters
  • Drainage hose or submersible pump (for emptying the hot tub)
  • Tow straps or lifting equipment
  • Saw (if necessary for cutting the hot tub into sections)
  • Plywood or heavy-duty sheets of plastic (for protecting the deck)
  • Protective covers or tarps (for protecting the deck)
  • A helper or two (for assistance)

Steps to Remove a Hot Tub from a Deck:

  1. Safety Precautions:
    • Prioritize safety by wearing safety goggles, gloves, and appropriate clothing for the task.
  2. Disconnect Utilities:
    • Turn off the power to the hot tub at the circuit breaker.
    • Disconnect the electrical connections to the hot tub, including the power supply and any lighting or accessories.
    • Shut off the water supply to the hot tub and disconnect the plumbing.
  3. Drain the Hot Tub:
    • Use a drainage hose or a submersible pump to empty the hot tub completely. Ensure that the water is drained away from the deck to prevent damage.
  4. Remove Access Panels and Skirting:
    • Hot tubs typically have access panels and skirting that can be removed. Unscrew or unclip these panels to access the internal components.
  5. Disconnect and Remove Components:
    • Disconnect and remove the hot tub’s heating unit, pump, and any other internal components that can be detached. Label or mark connections for reassembly if needed.
  6. Prepare the Deck:
    • Protect the deck by placing plywood or heavy-duty sheets of plastic underneath the hot tub’s location to prevent damage or staining.
  7. Lift the Hot Tub:
    • Use tow straps or lifting equipment to carefully lift the hot tub from its position on the deck. Ensure the weight is evenly distributed.
  8. Lower the Hot Tub:
    • Slowly and carefully lower the hot tub to the ground or a suitable transport surface. If necessary, place it on a flatbed trailer or a strong dolly for transportation.
  9. Disassemble If Needed:
    • If the hot tub is too large to fit through doorways, gates, or other narrow passages, you may need to disassemble it. This can involve cutting the hot tub into sections using a saw. Be cautious when cutting to avoid damage to the deck or yourself.
  10. Repair or Modify the Deck:
    • Inspect the deck for any damage or modifications that were made to accommodate the hot tub. Repair any structural damage and restore the deck to its original condition if necessary.
  11. Clean and Dispose:
    • Dispose of any hot tub components, accessories, or materials responsibly. Recycle or dispose of them according to local regulations.
  12. Patch and Refinish:
    • If there are holes or marks left on the deck, patch and refinish the affected areas to restore the deck’s appearance.

Remember that removing a hot tub can be a challenging and labor-intensive task, and it’s essential to prioritize safety throughout the process. If you’re unsure about any aspect of removing a hot tub or if the task seems too daunting, consider seeking assistance from professionals who specialize in hot tub removal and deck repair.

Also Read: