The GMC MultiPro Tailgate is a versatile and innovative tailgate that offers multiple configurations for added functionality. If you need to remove it for maintenance or other reasons, follow these steps to do so safely:
Materials and Tools You’ll Need:
- Safety goggles (recommended)
- A second person to assist (recommended)
Steps to Remove a GMC MultiPro Tailgate:
- Safety Precautions:
- It’s essential to wear safety goggles to protect your eyes during this process, as the tailgate may be heavy and awkward to handle.
- Open the Tailgate:
- Lower the MultiPro Tailgate to its fully extended position.
- Locate the Release Latches:
- On each side of the tailgate, near the pivot points, you’ll find release latches that secure the tailgate in place.
- Unlock the Latches:
- On both sides, simultaneously unlock the release latches. These latches may be secured with safety pins or locking mechanisms that need to be disengaged. Follow the instructions provided in your vehicle’s manual to unlock them.
- Have a Second Person Assist:
- Removing the MultiPro Tailgate is a two-person job due to its size and weight. Have a second person stand on the opposite side of the tailgate.
- Lift and Tilt the Tailgate:
- With your partner, carefully lift and tilt the MultiPro Tailgate slightly upward to disengage it from the tailgate hinges.
- Slide the Tailgate Out:
- Once the tailgate is lifted and tilted, slide it horizontally toward the rear of the vehicle to disengage it fully from the vehicle’s tailgate hinges.
- Set the Tailgate Aside:
- Place the removed tailgate in a safe and flat area, making sure it won’t get damaged or cause any safety hazards.
Note: The process of removing the GMC MultiPro Tailgate may vary slightly depending on your specific GMC vehicle model and year. Always consult your vehicle’s owner’s manual for the most accurate instructions and any specific steps or safety precautions recommended by the manufacturer.
To reinstall the MultiPro Tailgate, simply reverse the removal process. Have a second person assist in aligning the tailgate with the hinges and sliding it back into place. Engage the release latches on both sides to secure the tailgate, and make sure it’s properly locked in position before using it again.
If you’re unsure about removing the MultiPro Tailgate or have any concerns, it’s advisable to seek assistance from a GMC dealership or a qualified technician who can guide you through the process safely.
Also Read:
https://octopuspost.com/how-to-put-a-metal-roof-on-a-gazebo/
https://octopuspost.com/how-to-put-a-sling-on-a-shotgun-without-swivels/
https://octopuspost.com/how-to-put-a-snowmobile-engine-in-a-golf-cart/
https://octopuspost.com/how-to-put-a-wooden-puzzle-together/